Home › Frequently asked questions

What we are asked most often

Answers about the management and recovery of hazardous and non-hazardous industrial waste in Catalonia: lead times, prices, documentation, regulations and how we work at Ivalore. If you cannot find your question, call us on 972 11 80 74.

About Ivalore and how we work

Is Ivalore an authorised waste manager? What waste does it accept?

Yes. Ivalore is an authorised industrial waste manager, accredited by the Agència de Residus de Catalunya under code E-993.07, and has its own recovery plant in Sant Feliu de Buixalleu (Girona).

We are authorised for several hundred LER codes, hazardous and non-hazardous, from almost every chapter of the European Waste List: surface treatment baths and solutions, waste from chemical and thermal processes, effluent treatment sludge, oils, solvents, paints, contaminated packaging, absorbents and off-specification products, among others. Our new environmental authorisation is being processed and will extend the codes we can manage.

What waste does Ivalore not accept?

We do not manage explosive waste, healthcare or clinical waste, or radioactive waste. If you have any of these, we will tell you what type of waste manager should deal with it.

In which areas does Ivalore collect waste?

We collect waste throughout Catalonia: Barcelona, Girona, Lleida and Tarragona.

We also accept waste from other autonomous communities when it can be recovered at our plant, for example waste containing nickel, copper, tin or precious metals.

How long do you take to provide a quote and to collect the waste?

We contact you in less than 24 hours from your request. In that first call we assess whether we can quote directly with the information you give us or whether it is better for a technical sales representative to visit your site to see the waste.

Once the shipment documentation has been validated by the authorities, we collect the waste within 2 to 4 days.

What is the process like, from the moment I request a quote until the waste is collected?

You have a single point of contact throughout the process:

  1. Request. You tell us what waste you have, by telephone or using the quote form.
  2. First response in less than 24 hours. We quote directly or a technical sales representative visits your site.
  3. Identification. We classify the waste and assign it the LER code. If necessary, we analyse it in our laboratory or recommend a characterisation by an external laboratory.
  4. Quote. We propose the best management route, always looking for recovery first.
  5. Documentation. We process the acceptance sheet or prior notification and the shipment documentation on your behalf.
  6. Preparation. If you need them, we supply packaging, containers and labels, or we repackage waste that is in poor condition.
  7. Collection within 2 to 4 days. We arrange transport with authorised waste carriers, ADR or non-ADR depending on the waste.
  8. Reception and treatment. At the plant we check, weigh and analyse the waste and either recover it or send it to the most suitable treatment facility.
  9. Traceability. The whole journey is documented. For certain waste we provide a certificate of destruction and, at the end of the year, the data for your annual waste declaration.
Do you offer personalised follow-up for companies that generate waste on a regular basis?

Yes. Most of our customers are industrial companies that generate waste continuously and value having someone who knows their site.

Each customer is assigned a technical sales representative who visits in person and helps on three fronts: reducing the waste generated, complying with environmental regulations and finding the most economical management route for each waste stream.

Do you deal with urgent situations, such as a spill or an inspection?

Yes. We give priority to urgent situations: a spill or a leak, a container in poor condition, a storage time limit about to expire or an upcoming inspection. Call us on 972 11 80 74 and we will work with you to find the quickest way to resolve it.

Responsible management and traceability

How can I be sure that my waste is managed in an environmentally sound way?

The law makes producers responsible for their waste until it has been fully treated. To comply, the waste must be handed over to an authorised waste manager, the shipment must be documented and the waste hierarchy must be respected: first prevention, then preparing for reuse, recycling or recovery and, only as a last resort, disposal.

At Ivalore we cover all of these steps:

  • Reduce: your technical sales representative proposes measures to generate less waste, and less hazardous waste.
  • Recovery first: we recover materials, such as metals, and only when that is not possible do we look for the best treatment option.
  • Authorised waste manager: we are an authorised waste manager accredited by the Agència de Residus de Catalunya (E-993.07) and we recover waste at our own plant.
  • Traceability: we process the documentation for each shipment, which proves what waste was handed over, to whom and what treatment it received. For certain waste we certify its destruction.
  • Proximity: we treat waste in Catalonia whenever possible and never send it outside Europe.
Where does my waste end up? Do you export it outside Europe?

No. Ivalore never takes waste outside Europe or to developing countries, where traceability would be lost.

As well as recovering waste at our own plant, we work mostly with recycling plants in Catalonia, in some cases with plants in the rest of Spain and, in specific cases, with European plants. Managing waste close to where it is generated is part of our commitment to social responsibility, and allows us to prove at any time what treatment it has received.

Can you certify the destruction of waste?

Yes. For certain waste we issue a certificate of destruction.

It is requested mainly by companies that need to prove that an obsolete, rejected or recalled product does not go back into circulation, or that want to keep full traceability of how their waste has been managed.

Price and recovery

How is the price of managing waste calculated?

The price is calculated from two costs: the cost of the treatment the waste requires and the cost of transport to the plant.

For waste containing recoverable metals, once the waste arrives at the plant we analyse it and set the price according to the amount of recoverable metal it contains.

Is recovering waste cheaper than disposing of it?

In many cases, yes: whenever the waste allows material recovery, such as metals, or energy recovery, recovery is usually more economical than disposal.

That is why we study each waste stream to look first for the best recovery option and, only if that is not possible, the best treatment option.

Will you help me look for options to recover my waste?

Yes, it is the first thing we do with every waste stream. We study whether material can be recovered, such as metals, or whether it can be used for energy, and only when that is not possible do we send it to the most suitable treatment option.

Waste containing metals

Which metals does Ivalore recover?

We specialise in the recovery of waste containing nickel, copper, tin and precious metals.

It can arrive in different forms: spent electroplating baths and solutions, pickling liquors, treatment plant sludge containing metals or slag, among others.

What happens to waste containing metals when it arrives at the plant?

We weigh it and analyse it to determine its metal content. We set the price according to the amount of recoverable metal, and the waste is sent for metal recovery.

Sludge

My sludge is not accepted at landfill because of its moisture content. What options do I have?

Sludge that does not meet the moisture limit cannot go directly to landfill. You have two options: take it to a stabilisation plant or first subject it to an intermediate drying treatment, such as the one Ivalore offers.

If the drying is carried out by Ivalore, the sludge can still go to landfill. This is the option we usually recommend. We also treat sludge that fails the landfill acceptance criteria on other parameters.

Do you need a prior analysis of the sludge?

It is not essential, but it is advisable. With a prior analysis we can decide more quickly on the best recovery option or, if the sludge cannot be recovered, the best treatment option.

Identifying, packaging and labelling

I do not know how to classify my waste. Will you help me identify the LER code?

Yes. You tell us which process the waste comes from and what it is like (solid, liquid, paste, packaged or in bulk) and, if you have one, send us the safety data sheet or an analysis. With that information we assign the correct LER code and determine whether the waste is hazardous or non-hazardous.

Where necessary, we analyse its hazardous properties (HP). This is particularly important for mirror entries, which may be hazardous or non-hazardous depending on the composition of the waste.

I have unidentified waste. Can you help me?

Yes. It is common to find unlabelled drums or products whose origin nobody knows any more. We advise you on the best way to identify them:

  • In some cases the right course is to commission a characterisation from an external laboratory.
  • If it is an obsolete, expired or off-specification product, we analyse it in our own laboratory to propose the best form of treatment.
Can I mix different types of waste in the same drum or container?

No. The law prohibits mixing or diluting hazardous waste with other categories of hazardous waste, with non-hazardous waste or with other substances, and it is also inadvisable to mix non-hazardous waste if that makes it harder to recover.

Apart from the safety risk, mixing usually makes management more expensive: waste that could be recovered if kept separate can no longer be recovered. If you are unsure how to segregate your waste, we will explain it to you and, if you need it, train your staff.

What do I do with empty packaging that has contained hazardous products?

Manage it as hazardous waste. Empty packaging containing residues of hazardous substances, or contaminated by them, has LER code 15 01 10* even if it looks empty. It is one of the most common types of waste in industry: drums, jerrycans, IBCs, sacks or tins of chemicals, paints, oils or solvents.

Keep it closed and labelled, separate from clean packaging, and hand it over to an authorised waste manager. We collect it, including in small quantities.

What packaging do I need to store and transport my waste?

It depends on the type of waste, its physical state and how hazardous it is. Hazardous waste must be in suitable packaging and, where required by the regulations on the transport of dangerous goods (ADR), in approved packaging.

We tell you which packaging or container is right for each type of waste and we can supply you with containers and tanks.

Do you take care of the waste labels?

Yes. We provide the waste labels with the mandatory information (LER code, hazard pictograms and producer details), so that the packaging is correctly identified during storage and transport.

I have waste in packaging that is broken, very old or in poor condition. What do I do?

We help you repackage it. We check the condition of the packaging and of the waste and transfer or repack it into suitable packaging, so that it can be transported safely and in compliance with the regulations. We then manage it like any other waste, looking for recovery first.

Collection, transport and storage

Is there a minimum quantity for waste collection?

There is no minimum quantity. For small quantities we run grouped collections with our van, which collects waste from several producers on a single route.

This is how we collect, for example, fluorescent tubes, batteries and button cells, cartridges and toners, jerrycans, laboratory reagents and, in general, waste in small containers.

Can I transport my waste to the plant myself?

Only if you meet the regulatory requirements. Waste must be transported by waste carriers registered in the register of waste production and management, after submitting the prior notice to the authorities. If the waste is hazardous, the transport must also comply with ADR: authorised vehicle and driver, approved packaging, labelling and documentation.

To spare you all this, at Ivalore we arrange the transport for you. We work with a wide network of partner carriers, with fleets for ADR and non-ADR waste, and for small quantities we have our grouped collections.

How long can I keep waste in storage? Can the time limit be extended?

Law 7/2022 on waste sets a maximum storage time at the place where the waste is produced, counted from the moment the waste first starts to be deposited:

  • Non-hazardous waste: 2 years if it is destined for recovery and 1 year if it is destined for disposal.
  • Hazardous waste: 6 months, whether it is going for recovery or for disposal.

In the case of hazardous waste, exceptionally and on justified grounds, the Agència de Residus de Catalunya may extend the time limit by a maximum of a further 6 months, provided that the protection of health and the environment is guaranteed.

So that you do not reach those limits, we schedule collections according to the rate at which you generate each waste stream. If you need an extension, we tell you how to apply for it.

Documentation and legal obligations

What documentation do I need to hand over waste in Catalonia?

All the documentation is processed online in the Sistema Documental de Residus (SDR) of the Agència de Residus de Catalunya:

  • Producer code. Sites that generate hazardous waste and those that generate 1,000 tonnes or more of non-hazardous waste per year must register in the register of waste producers of Catalonia. The code assigned is used in all the documentation.
  • Acceptance sheet (FA) or prior notification (NP). This is the agreement between the producer and the authorised waste manager, one for each type of waste, which informs the Agència de Residus of how that waste will be treated. Which one applies depends on the waste and its destination: the NP is the one processed, for example, for hazardous waste or for waste going to landfill, and may require a basic characterisation and a photograph of the waste. It is processed before the first shipment, the Agència has 10 working days to validate it and, once validated, it is valid for 3 years for all shipments of that waste.
  • Tracking sheet (FS). It accompanies each waste transport throughout its journey. For grouped collections, the multi-stop tracking sheet is used.
  • Transport control document (DeCA). Since 5 October 2026, public road haulage of goods, including waste, must carry the control document in electronic format, with a QR code. The paper document is no longer valid.
  • Waste coming from outside Catalonia. The shipment requires a treatment contract and an identification document and, if the waste is hazardous or is going for disposal, a prior notification submitted at least 10 days in advance.

We normally process all this documentation on your behalf, so that the collection is as quick as possible and you only have to sign. If you prefer to process it yourself, you can do that too and we will help you with whatever you need.

Will you help me with the annual waste declaration (DARI)?

Yes. At the end of the year we provide the data for all the waste we have managed for you, which is what you need to submit the annual industrial waste declaration (DARI).

If you prefer, TMI, our group's environmental consultancy, will submit it for you.

Do I need to have a hazardous waste minimisation plan?

If your site generates 10 tonnes or more of hazardous waste per year, yes. Law 7/2022 requires hazardous waste producers to have a minimisation plan setting out the measures to reduce the quantity and hazardousness of their waste, and to report the results every four years to the autonomous community.

Sites that generate less than 10 tonnes of hazardous waste per year are exempt, as are companies with EMAS or an equivalent environmental management system that includes minimisation measures.

With TMI, our group's environmental consultancy, we help you draw it up, and your technical sales representative proposes specific measures to reduce waste day to day.

Will you help me review the waste listed in my environmental licence or authorisation?

Yes. We compare the waste listed in your environmental licence or authorisation with the waste you actually generate today. If your process has changed and new or different waste has appeared, we tell you when it is advisable to apply for a non-substantial change to keep the licence or authorisation up to date.

What are the advantages of Ivalore being part of a group with an environmental consultancy?

With a single point of contact you have both the management of your waste and environmental advice from TMI, our group's consultancy.

This allows us to anticipate regulatory changes and warn you before they affect you, as with the packaging regulations or the electronic transport control document (DeCA), mandatory since 5 October 2026. That way you can adapt in time and avoid penalties or unforeseen costs.

Can you train our staff in waste management?

Yes. Through TMI, our group's environmental consultancy, we train your staff in how to handle, segregate, package and label waste correctly.

Good segregation at source avoids mixtures that make management more expensive, makes recovery easier and reduces risks on site.

Closing down an activity

Will you help us decommission an industrial unit or close down an industrial company?

Yes, we support you throughout the process. When an industrial unit is closed, relocated or decommissioned, we identify and classify all the waste on site (obsolete product, process residues, baths, sludge, packaging) and take care of its collection and management.

When closing down an industrial activity, it may also be necessary to check whether the soil has been contaminated, for example with a soil status report. Together with TMI, our group's environmental consultancy, we help you with these procedures so that you can close the activity with everything in order.

No-obligation quote

Do you have waste and are not sure whether we can manage it?

Tell us what it is and we will reply in less than 24 hours.

  • Reply within 24 hours
  • No-obligation quote
  • Waste manager authorised by the Catalan Waste Agency (E-993.07)

Prefer to talk to us? +34 972 11 80 74

We will only use this information to reply to your request. More information in our privacy policy.